Puffco Peak Pro: Cleaning Guide
You did the research, took the plunge, bit the bullet price and treated yourself to the almighty Puffco Peak Pro. Well done for making it this far, you make great decisions! The next great decision on your list is to look after it really well, so it lasts forever. Even the most careful experienced users are going to get it messy eventually. In this guide, we are going to tell you everything you need to know about cleaning and maintaining your Puffco Peak Pro performance.
Or you may have gotten unpleasant vapor taste during your last boost mode. Well then it's about time to clean and get that flavor quality back!
Top Cleaning Products for PEAK PRO:
How often should I clean my Puffco Peak Pro?
Puffco recommends regular cleaning to maintain an optimum experience. They don't quite state how regularly as that depends on how heavily it is used. We recommend a weekly clean for the daily user to maintain quality flavor vapor. You should carry out a thorough clean every time the battery fully depletes and needs to be recharged. You should soak the atomizer anytime you notice excess flooding or if you get a red-blue response from the device.
Checkout: - Puffco Peak Pro Review
TIP: A good way to avoid having to clean more frequently is to swab your chamber after each use with an ISO soaked cotton swab or similar cleaning tool.
In this guide, we are going to tell you everything you need to know about cleaning and maintaining your Puffco Peak Pro.
Puffco Peak Pro Cleaning Guide: You Will Need…
- Cotton Swab/Q-Tip
- 99%+ isopropyl alcohol
- Cleaning wipe
TIP: If you can't get your hands on 99% you can make do with a lower percentage. Puffco recommends 99% Isopropyl Alcohol because lower percentages have a higher water content which “could potentially cause issues”.
Disassemble Puffco Peak PRO
To properly clean your Puffco Peak Pro, you must first disassemble it. Before you begin, make sure that the device is powered off and has cooled down. IF still on , press and hold Begin by unscrewing the base of the device. There are two small screws on either side of the base that need to be loosened. Once these screws have been removed, you can gently lift off the base and set it aside.
- Remove the cap.
- Turn your atomizer counterclockwise to unscrew it from the base.
- Remove the atomizer
Glass from base
- In one hand, hold on to the base and with the other, grab the glass.
- Gently pull the back of the glass out from the base until it unclips and becomes free.
What To Clean to get the best flavor?
The most important bit to keep clean of your Puffco Peak Pro is the chamber. This is because it comes into contact with concentrates the most. Excessive residue and grime may result in an inferior dabbing experience. It’s also super important to keep the glass and base clean, so there is no build-up of dirt.
How to Clean the Puffco Peak Pro: Chamber/Atomizer
- Take a q-tip/cotton swab and dip it in the ISO Alcohol.
- Swab the gold connection points on the bottom of the chamber, removing any grime or residue.
- Swab inside the chamber, removing any residue.
TIP: We found that this method works best if the chamber has been recently used and is still a little warm. Please allow it to cool down before handling. The 3D Ceramic Atomizer is cleaned in a similar fashion.
- Fill a glass/beaker with the 90%+ ISO alcohol
- Submerge the chamber for at least 30 minutes.
Warning: Never use water to submerge the chamber. Water exposure to ceramic can potentially damage the part.
Checkout: - The 13 Best Wax Vaporizers
How to Clean the Atomizer & Bowl
Now that you have access to the atomizer, you can begin cleaning it. Take the cotton swab and saturate it with your 99%+ isopropyl alcohol. Wipe down all of the surfaces that were accessible from outside of the device, such as the top rim of the atomizer and any visible threads or crev ices.
Once the initial cleaning is complete, you can begin to get into the more tricky areas of the atomizer. Inserting a cotton swab into the top hole and moving it around will allow you to clean out any excess residue that has built up inside the chamber. Make sure that you are gentle when doing this as there are delicate parts inside ceramic bowl.
How to Clean the Carb
Remove the carb cap, take a cotton swab and saturate it with 99%+ ISO alcohol. Wipe down all visible surfaces of the cap to remove any build-up or residue. You can also insert the cotton swab into the air hole of the cap and move it around to ensure all residue is removed.
Allow your carb cap to air dry before putting it back onto your device. This will ensure that any residual alcohol has evaporated and won’t get into your concentrates when you use the device.
Clean the Connectors and Mouthpiece
Now that your atomizer is clean, you can move onto the connectors and mouthpiece. Take a new cotton swab and saturate it with your 99%+ isopropyl alcohol. Gently wipe down all of the connectors on both the atomizer and the base of the device, as well as the mouthpiece itself. You may need to use multiple cotton swabs.
How to Clean the Puffco Peak Pro: Glass
Cleaning the glass attachment of your Puffco Peak Pro vaporizer is an important part of keeping it in top condition. Here are some simple steps to help you keep your device looking and working like new:
- Start by removing the glass attachment from the device and disassembling it into its individual components. This will make it easier to reach all areas of the glass, and ensure that you can clean it thoroughly.
- Next, take some cotton swabs and saturate them with your 99%+ isopropyl alcohol. Use the swabs to gently scrub away any residue from inside and outside of the glass attachment.
- Finally, rinse the glass off with warm water and let it air dry before reassembling it back onto your Puffco Peak Pro vaporizer.
- Fill a glass/beaker with ISO alcohol
- Submerge the glass in the beaker for 30 minutes.
- Once soaked, remove and rinse thoroughly with clean water to remove any excess alcohol.
- Allow glass to thoroughly dry before re-attaching to the base.
Warning: Try to avoid letting water seep into the bottom chamber of the glass.
How to Clean the Puffco Peak Pro: Base
Cleaning the battery base of the Puffco Peak Pro is an important part of the cleaning process and should be done regularly. Here are step-by-step instructions on how to properly clean your Puffco Peak Pro base so it can stay in top condition:
If you skipped the steps above, you need to start by removing the glass attachment from the device and disassembling it into its individual components. This will make it easier to reach all areas of the base, and ensure that you can clean it thoroughly.
- Take a q-tip/cotton swab and dip it in the ISO Alcohol.
- Next, Uuse the swabs to gently scrub away any residue from inside and outside of the base.
- Swab the gold connection points on the base to ensure a proper connection.
- Swab the airpath with your q-tip.
- Use an organic wipe and swipe any dust from base and power button.
Warning: After cleaning, allow all parts to dry thoroughly before reassembly. Do not get the base wet, do not use water, it is electric so this may (probably will) damage it.
We hope you found this cleaning guide helpful. Our best advice would be that you allow cleaning of your Puffco Peak Pro to become a routine activity. The best way of doing this is to have it in your mind that you will clean it every time the battery runs dead. Alternatively, set a reminder in your calendar once a month to make sure you deep clean your product. Happy dabbing and enjoy the fresh vapor!
TIP: If you find yourself needing to clean your chamber frequently, you may be using too much material in your sessions. Considering the size of the Puffco Peak Pro's bowl, if this is the case, we take our hats off to you! The sweet spot is only to use as much concentrate as you can fully vaporize without any residue flavor.
WE RECOMMEND: THE PROXY
🥇 Rated Hash & Concentrate Vape:
What is an effective cleaning solution to use on my Peak Pro?
We recommend using 99% Isopropyl Alcohol when cleaning your Peak and Peak chamber, as lower percentages of Isopropyl Alcohol contain water content which may cause issues.
My device is flashing white three times consecutively. What should I do?
No need for concern! If your chamber isn't attached to the base, the device flashes three times, just give it a quick disconnect and reconnect!
My Peak Pro flashes red and blue when I attempt to heat it. How can I resolve this issue?
The Red-Blue-Red-Blue flashing response from your Peak Pro indicates a chamber connection error. To address this, remove and clean the chamber and submerge it in 90%+ Isopropyl Alcohol for 20 minutes. Note that water should not be used – only 99% ISO. Ensure the chamber is thoroughly air dry before reattaching. If issues continue, submit a warranty claim through the app for additional help.
How can I charge my Puffco Peak Pro?
With USB-C Charging. Connect your device to a wall outlet using the USB-C charger provided. When charging, the light will be pulsing and it will turn off after reaching full charge.
It takes approximately 2.5 hours to fully recharge a drained battery. But don't worry you can still vape concentrate with your Peak Pro while charging.
After attempting to update the firmware, my Peak Pro is no longer functional. Can you assist me?
To begin, connect the device to its charger and allow it to recharge for approximately 10 minutes to verify that the power is not completely depleted. Keep in mind that this "dead" state may cause the LED indicator lights not to operate but don't fret since the battery will still be in the process of recharges.
In order to complete the recovery and update the firmware, it is advised to restart the app. Deleting or unpairing the device should not be done at this stage.
If you are still experiencing issues, or have questions about any of the settings please reach out to Herbalize support or Puffcos support team at firstname.lastname@example.org for additional help.
Can I use 70% alcohol to clean Puffco Peak Pro?
The answer is yes, you can use 70% alcohol to clean the Puffco Peak Pro. However, we do recommend 99%. Alcohol is an effective disinfectant and can be used to remove dirt, oil, and residue from the device. It is important to use a cotton swab or cloth to apply the alcohol so that it does not damage any of the components on the device. Make sure that you are careful when cleaning and that you do not use too much alcohol.
How long do Puffco Peak Pro coils last?
The Puffco Peak Pro coils are designed to last anywhere from 10-20 sessions, depending on how frequently they are used and temperature settings. To ensure that you get the most out of your coil, it’s important to clean it regularly.
To clean the coil, first remove it from the atomizer base and rinse with warm water. Next, use a cotton swab or cloth soaked in 99% isopropyl alcohol to clean the coil and remove any residue. Finally, allow the coil to air dry before reattaching it to the atomizer base.
How many hits does a Puffco Peak Pro have?
The Puffco Peak Pro is a portable, rechargeable vaporizer that can provide up to 30 sessions per charge. It has an advanced heating system and precise temperature control so you can customize your experience with every puff. The device also comes with a full range of temperature settings ranging from 450°F (232°C) to 600°F (315°C). On average, the device can provide 10-12 hits per session.
The peak Pro battery should last up to 30 heating cycles before requiring a recharge. However, frequent use of Sesh Mode may reduce the duration of each cycle.
To check your battery life, press the power button three times and observe the indicator light's color. Green indicates between 100% and 60%, yellow indicates between 60% and 30%, red indicates between 30% and 0%.
To recharge simply plug your USB-C Charging cable into the device and wall outlet or via the wireless charger.
Pro Tip: Remember to hold down the power button down to lock your device, this will save battery life.
How do I clean the center bottom burnt mark of the Puffco Pro atomizer?
Cleaning the burnt mark on the center bottom of the Puffco Pro atomizer can be tricky deep cleaning, but it is certainly doable. The first step to cleaning this area is to remove any excess material that may have been left behind in the bowl from previous sessions. This can be done by using a cotton swab and some rubbing alcohol or a specialized cleaner such as Smono Premium Cleaning Solution. Once all of the excess material has been removed, you can use a cotton swab soaked in 99% isopropyl alcohol to scrub the burnt mark gently. Allow the area to air dry before reassembling the device.
Does the Puffco Peak Pro come with warranty?
Yes, the Puffco Peak Pro comes with a limited warranty. The warranty covers defects in workmanship and materials for one year from the date of purchase. This means that if you experience any problems due to faulty materials or construction, Puffco will repair or replace the product free of charge.
The warranty does not cover normal wear and tear, accidental damage, misuse, improper cleaning and maintenance, or any modifications. Please refer to the Puffco website for more information about the warranty terms and conditions. For further questions contact Puffco support.